mailing: P.O. Box 97 Philomath, OR 97370
physical: 1490 SW 3rd St. Corvallis, OR 97333
Phone: (541) 844-8748
Toll Free: 888-526-3275
Fax: (435) 213-2232
Email: info@heritagenaturalfinishes.com
|
|
 |
|
EXTERIOR FINISH
This is our Original Finish with both a UV inhibitor and mildewcide (both manufactured by different companies) added for extra protection in the weather. It can be sprayed, brushed or ragged on for use anywhere in the home but we recommend it primarily for exterior use. Exterior Finish is great for large timbers, logs, siding, decks or any outdoor furniture, trim or wood elements. A well applied exterior finish will bead water, yet still allow the wood to breathe and dry out when needed. Unlike most surface finishes, you can re-apply Heritage Natural Finishes each year if needed, without stripping off the old finish first. More about exterior application here.
Coverage: Approx. 350 square feet per gallon or 500 board feet per
gallon; rough-sawn materials tend to absorb more. You get less coverage on the
first coat and more on the second. You also get more coverage on harder wood
species versus softer species like pine. How wet the wood is will also vary the
coverage numbers as well.
Clean Up: For
spills, over spray, or to clean up brushes, use our Pure Citrus Solvent
or other solvent (Turpentine, Mineral Spirits, etc.).
*For additional protection against insects, consider treating all wood with a borate solution before oiling.
Sizes: 4oz sample size, quarts, one gallon paint can, 3 gallon steel pail with pour spout lid, 5 gallon steel pail with pour spout lid, and 55 gallon drums.
|
|
Photo credit: Top of page photo submitted by Colin Buell of Timeless Timberworks, Sodus, NY. Used by permission.
|
|
|
|